Opti Line

Danfoss DHP-L Opti represents Opti range in Danfoss offer. DHP-L Opti has a separate hot water tank. With its low height, Danfoss DHP-L Opti is ideal for use with low ceilings.

Danfoss DHP-L Opti is intended to be supplemented with a separate hot water tank. An excellent choice if you need a lot of hot water or want to supplement an existing boiler.

Opti technology incorporates an intelligent control system that via speed controlled circulation pumps ensures that the performance is always adjusted to the prevailing requirements and conditions of the heating system. This makes the heat pump always work under the most ideal conditions available, you gain a maximum of efficiency and a minimum of energy consumption, guaranteeing you the highest possible COP, second by second, hour by hour.

We produce different models of hot water tanks to meet different requirements. You can chose between a stainless steel tank or a copper-lined steel tank. Hot water tank dedicated to DHP-L Opti is 200 l or 300 l capacity.

DWH Opti is equiped in TWS (Tap Water Stratificator) technology which enables a hot water production that is faster and at higher temperatures than with traditional technology.

This heat pump operates at a low sound level and it can easily be supplemented to produce cost effective cooling. You can also control and monitor it via the Internet.

The reliable, quiet scroll compressor is also in this heat pump. Danfoss DHP-L has an integrated electrical heating element with three power stages as a back up heater.

Danfoss DHP-L Opti is available in:

• six power outputs, from 6 to 16 kW - for 400 V 3-N
• four power outputs, from 6 to 12 kW - for 240 V 1-N

DHP-L Opti - data sheet
Heat Pump Brochure
Danfoss OnLine - control your heat pump via internet